Honeywell (MI-MCP-GLASS-I) Addr. Manual Call Point W/ Break Glass/Isolator

Honeywell (MI-MCP-GLASS-I) Addr. Manual Call Point W/ Break Glass/Isolator

Including EN54 break glass & isolator, without back box. Compatible with standard electric embedded box with screws. Requires SR1T for surface mounting or a single gang backbox for flush mounting.

The MI-MCP Series Manual Call Points are  designed to provide a manual alarm interface to Morley IAS’s fire alarm control panel. Installation efficiency, flexibility and compliance with the latest standards are at the heart of the call point range.

The unique ‘plug and play’ concept is designed specifically to reduce installation time by using a terminal block which can be wired  during the initial installation cabling with a link (P102) to provide continuity for testing.  During the commissioning phase, the links are removed and the terminal block is simply inserted into the connector at the back of the unit. No re-termination is required.

Both break glass, supplied, and re-settable operating elements (PS230) can be used in the standard unit. Operation of the re-settable element, as well as being indicated by the units LED, is also indicated by a yellow strip on the element which becomes visible when activated. With the addition of a hinged transparent cover (PS200) the element may be protected against accidental operation and may be further protected by using a cover seal (PS056) which requires breaking in order to operate the unit.

Key Features:

• Unique ‘Plug & Play’ installation concept
• Re-settable operating element option
• Analogue addressable communications
• Semi-Flush or surface mounting
• Fully compliant with EN54, Part 11
• Backward compatibility
• Enhanced aesthetics
• Integral LED
• Integral loop isolation option