Scantronic 09651EN41 8 Zone Control Panel + 9941 Keypad
[09651EN-41]

(Image may be for illustrative purposes only)

Manufacturer: Scantronic Model: 09651EN-41 Price:   £59.89 inc. VAT  £49.91 exc. VAT  Quantity:

Scantronic 09651EN41 8 Zone Control Panel + 9941 Keypad

Specifications

General
Product name	9651EN
Security Grade	EN50131-1 or PD6662 Grade 2x
Sales number	09651EN-41
Capacities
Max zones	8
Zones - on board	8 FSL or 8CC (with common tamper)
Zones - on expander	None
Standard wired outputs	3
Communicator outputs:	8
Setting Levels:	1 Full + 3  Part (one partition)
Partitions:	Four (no part setting partitions)
Log capacity (events):	700
No. Keypads	4
Internal Clock	±10 minutes over one year (depending on the accuracy of the mains supply frequency).
Downloader	None
Security
Access code	4 or 6 digits
Number of user codes	50 plus installer
Code blocking	Blocked for 90s after 13 incorrect characters in series.
Proximity tag differs	4,294,967,296
Physical
End Station
End Station dimensions:	235mm W, 245mm H, 90mm D
End Station weight (w/o battery):	3.3 kg
Case material	Steel
Keypad
Keypad name	9941/9943
Environmental
Environmental Grade	Class II
Operating temperature	-10° to +55°C
Humidity	96% RH
Radio
Expander/Built-in:	None
Communications
Built in Communicator	No
Plug on communicator	No
Plug-by communicator	Provides 8 programmable outputs for plug-by module.
Protocols:	Depends on communicator
Power Supply
EN50131-6 Type
Mains power supply	230VAC +10%/-15%, 200mA max, 50/60Hz ±5%
End station psu	13.8VDC, 1.0A
End station consumption	130mA quiescent, 220mA active
Keypad consumption (Backlight  OFF)	30mA
Keypad consumption (Backlight ON)	70mA
Standby Battery	12V rechargeable lead-acid, gel-type battery.
Low battery voltage cutoff:	10V
Standby time:	Depends on battery
Max recharge time:	Depends on battery
Battery charge limit	250mA
12V Aux supply (inc LS)	12VDC min, 13.8VDC max,  ripple ±2% maximum, 500mA,.
14V4 supply	None
Monitoring includes	Mains fail, battery low voltage, battery failure.
Outputs
O/P 1	Open-collector transistor outputs, 500mA, 12VDC, negative applied.
O/P 2	Open-collector transistor outputs, 500mA, 12VDC, negative applied.
O/P 3	Open-collector transistor outputs, 500mA, 12VDC, negative applied.
O/P 4	None
O/P 5-8	None
LS (loudspeaker)	Supports two parallel-connected, externally mounted loudspeakers for internal sounder or EE tones: minimum speaker impedance 8Ω.
Communication outputs	12V logic outputs, negative applied in alarm (positive removed), 50mA maximum.
ST (Siren test)	None
Inputs
TR	Tamper return for Bell
Tellback/Remote reset**	Tellback/Remote reset**. +12V applied to operate reset.
Line Fault input**	Line Fault input**. +12V applied to indicate line failure.
Fuses
Mains	The panel uses a T-250mA mains fuse.
Other	The panel uses fast-acting polyswitch fuses for overcurrent protection:
	F1 – 12V AUX output
	F2 – Battery output
	F3 – Bus 1