NEW TAKEX (TXF-125E) Battery-Powered External Quad Beam, Up to 100m
- Brand:Takex
- Product Code:TXF-125E
- Availability:Please Call or Email to Checkout
NEW TAKEX (TXF-125E) Battery-Powered External Quad Beam, Up to 100m Between Beam Tx and Rx (4-Channel) Inc. Pole Clamps
The TXF-125E is a battery operated quad photoelectric beam sensor designed for compatibility with leading wireless systems; reducing the time and cost of permanent installations and allowing the use of Active Infrared Beams on rapid deployment or temporary installations. With 4 selectable frequencies, multiple beam sets can be used in both linear and stacked configurations without risk of crosstalk, further assisted by a transmitter power function that allows the user to set 25/50/75/100m zones.
Two 3.6V (17Ah) batteries can power each unit for approximately 5 years of service, and ±90° horizontal/±20° vertical adjustable optics cater for the most dynamic of terrains.
Features:
- 4 x synchronised high power beams
- 4 selectable operation ranges 25/50/75/100m
- 4 selectable beam channels to prevent crosstalk
- up to 5 year battery life using 2 x LS 33600 (3.6V 17Ah) batteries per unit
- increased beam separation minimises nuisance alarms
- vivid internal colour aids beam alignment procedure
- ±90° horizontal ±20° vertical adjustable sensor heads
- environmental monitoring circuit
- IP65 housing
Specifications:
| Detection system | Near infrared pulsed beam interruption system (TR-RE 4 beam simultaneous interruption) |
| Infrared beam | Single modulation pulsed beam by LED (near infrared beam light-emitting diode) |
| Protection distance | Outdoor 330ft (100m) or less |
| Beam power setting | 330ft (100m) / 245ft (75m) / 165ft (50m) / 82ft (25m) |
| Max. arrival distance | 10 times (1000m) |
| Response time | 0.05 sec, 0.10 sec, 0.25 sec, 0.5 sec |
| Battery | SAFT: LS 33600 (or equivalent) 3.6V, 17Ah |
| Battery life | Transmitter = Up to 5 years* (2 batteries) Receiver = Up to 5 years* (2 batteries) *Approximate, not guaranteed |
| Beam adjustment | Horizontal: ±90°, Vertical: ±20° |
| Alarm LED | Red LED (Receiver) ON: when an alarm is initiated |
| Attenuation LED | Red LED (Receiver) ON: when an alarm is initiated |
| Ambient temperature range | -10°C to +50°C (14°F to 122°F) |
| Functions | Modulated beam frequency selection Tone indicator Repeat output Monitor jack Response time adjustment Upper/Lower beam switch Low battery indication Wireless alignment checker connecting function Battery saving function Battery sharing |
| IP rating | IP65 |
| Mounting positions | Outdoor, Indoor |
| Weight | Transmitter: 1.5kg (without batteries), Receiver: 1.5kg (without batteries) |
| Appearance | Cover: PC resin (Wine Red), Base: ASA resin (Black) |
APPLICATIONS: A battery-powered beam (batteries not included, order separately as above; also widely available on Internet etc) for wireless applications, hard-to-cable-to areas or sites with no mains power. Use with 'any make' wireless transmitter or GSM dialler etc for remote signalling (not supplied) to create temporary or permanent secure systems. Call Takex for application and system design advice.
For more details, pelase refer with our attached datasheet.