AES (EL00C) E-Loop commercial loop only EXIT MODE
- Brand:AES
- Product Code:EL00C
- Availability:Please Call or Email Us to Check Availability
AES (EL00C) E-Loop commercial loop only EXIT MODE
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle.
Note: Gate or door controller must have a dedicated open input and auto close function enabled.
Installation in 3 simple steps
1 - Code in e-Loop.
2 - Secure e-Loop to the driveway.
3 - Calibrate e-Loop ... and you're ready. to operate in less than 15 minutes. Save many hours of installation time compared to wired loop systems.
Quick and easy installation.
- Compact profile - only 26mm high x 200mm diameter.
- Not affected by ground movement.
- 10600 mA battery giving up to 10 years battery life.
- High security 128 bit encryption.
- Range up to 50 meters.
- Made of high impact plastic (10 tonne static load limit).
Kit Contents:
- 1 x e-Loop wireless detection module.
- 1 x 2 channel e-Trans 50 transceiver unit. (or option LCD e-Trans 200 transceiver)
- 2 x Dyna bolts.
OPTIONAL:
| EL00C-K | Door Access controller exit mode commercial kit EL00C-K |
| ELOOC-KLT | E-Loop Commercial loop kit EXIT MODE with LCD Transceiver |
For more details on this product range, including part numbers, please click on the links below to download the relevant document for this product.