• Security, Fire and Alarm Systems, CCTV and Electronic Security Wholesalers and Suppliers
Elmdene GEN2-18-C, 12V DC 1.5 Amp Grade 2 PSU Box (Type C - Hinge Lid)

Elmdene GEN2-18-C, 12V DC 1.5 Amp Grade 2 PSU Box (Type C - Hinge Lid)

  • Brand:Elmdene
  • Product Code:GEN2-18-C
  • Availability:Please Call or Email Us to Check Availability

Please contact sales on 01628 669124 or email sales@hunters-wholesalers.co.uk for a quote on this product 


Elmdene GEN2-18-C, 12V DC 1.5 Amp Grade 2 PSU Box (Type C - Hinge Lid)

12V d.c. Switch Mode PSU (13.8V) 1.5A to load + additional current for battery charging. Grade 2 Intruder systems. Mains, Battery and PSU volt free fault outputs. Deep discharge protection. Diagnostic LEDs. Lid tamper. Low quiescent battery standby current. Fit up to 17Ah battery. 'C' Box: 275h x 330w x 80d - Hinge lid

The GEN Switch Mode range of power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing Intruder Alarm Systems to grade 2 and 3 under PD6662:2010 / EN50131-6:2008, with built in quality and reliability.

Features:

  • High Efficiency Switch Mode Operation
  • Comprehensive Battery Management
    • Deep Discharge Protection
    • Battery Fault Detection (Grade 3)
    • High Efficiency 3 Stage Charging (18Ah)
  • Dedicated Fault Outputs
    • EPS Fault (mains fail)
    • APS Fault (battery fault) (Grade 3)
    • PSU Fault (general fault)
  • Internal LED PSU Status
  • High Security Front and Rear Tamper (Grade 2 front only)
  • Full Rated Current To Load + Battery Charging
  • Electronic Overload Protection
  • Mains Transient Protection

Specification:

  • Output (mains on): 13.8V dc nominal
  • Load Output: 18 Maximum 1.5A  - 12 hours @ 1.4/1.5A (17/18Ah)
  • Mains Supply: 90V  - 265V a.c @50/60Hz
  • Environment: -10C to 40C @ 95%RH
  • Enclosure Type A: 275H x 330W x 80D - hinge lid
  • Box Sizes for battery: '18' models1 x 17 or 18Ah 1.5A**
  • Standards: EN2 - Grade 2

**Full current to load plus additional current to charge standby battery.

GEN range Complies with the following standards::

EN50131-6:2008      GEN2 –Grade 2        GEN3 – Grade 3           All Environmental Class II

For more details, please refer with our attached datasheet.

There are no reviews for this product.

Write a review

Please login or register to review