Elmdene, GEN2-08-A, 12V DC 1.0 Amp Grade 2 PSU Box (Type A - Hinge Lid)

Elmdene, GEN2-08-A, 12V DC 1.0 Amp Grade 2 PSU Box (Type A - Hinge Lid)

12V d.c. Switch Mode PSU(13.8V) 1.0A to load + additional current for battery charging. Grade 2 Intruder systems, will accommodate Communication Devices. Mains, Battery and PSU volt free fault outputs. Deep discharge protection. Diagnostic LEDs. Lid tamper. Low quiescent battery standby current. Fit up to 7Ah battery. 'A' Box: 200h x 230w x 80d - Hinge lid

The EN range of power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing Intruder Alarm Systems to grade 2 under PD6662:2010 / EN50131, with built in quality and reliability.

Features:

• Comprehensive Battery Management
  • Deep Discharge Protection
  • Double Battery Model has independent Battery Charging & Monitoring
    
• Dedicated Fault Outputs
  • EPS Fault (mains fail)
  • PSU Fault (general fault)
    
• Internal LED PSU Status
• High Security Front and Rear Tamper (grade 2 front only)
• Full Rated Current To Load + Battery Charging
• Electronic Overload Protection
• Mains Transient Protection

Specification:

• Output (mains on): 13.8V dc nominal
• Load Output: 08 Maximum 1.0A  - 12 hours @ 580/660mA  (7/8Ah)
• Mains Supply: 90V  - 265V a.c @50/60Hz
• Environment: -10C to 40C @ 95%RH
• Enclosure Type A: 200H x 230W x 80D (Hinge Lid)
• Box Sizes for battery: '08' models1 x 7 or 8Ah 1.0A**
• Standards: EN2 - Grade 2

 **Full current to load plus additional current to charge standby battery.