• Security, Fire and Alarm Systems, CCTV and Electronic Security Wholesalers and Suppliers
Elmdene GEN3-08-A, 12V DC 1.0 Amp Grade 3 PSU Box (Type A - Hinge Lid)

Elmdene GEN3-08-A, 12V DC 1.0 Amp Grade 3 PSU Box (Type A - Hinge Lid)

  • Brand:Elmdene
  • Product Code:GEN3-08-A
  • Availability:Please Call or Email to Checkout

Please contact sales on 01628 669124 or email sales@hunters-wholesalers.co.uk for a quote on this product 


Elmdene GEN3-08-A, 12V DC 1.0 Amp Grade 3 PSU Box (Type A - Hinge Lid)

12V d.c. Switch Mode PSU(13.8V) 1.0A to load + additional current for battery charging. Grade 3 Intruder systems. Mains, Battery and PSU volt free fault outputs. Deep discharge protection. Diagnostic LEDs. Lid & rear tamper. Low quiescent battery standby current. Fit up to 7Ah battery. 'A' Box: 200h x 230w x 80d - Hinge lid

GEN Features:

  • High Efficiency Switch Mode Operation
  • Comprehensive Battery Management
    • Deep Discharge Protection
    • Battery Fault Detection (Grade 3)
    • High Efficiency 3 Stage Charging (18Ah)
  • Dedicated Fault Outputs
    • EPS Fault (mains fail)
    • APS Fault (battery fault) (Grade 3)
    • PSU Fault (general fault)
  • Internal LED PSU Status
  • High Security Front and Rear Tamper (Grade 2 front only)
  • Full Rated Current To Load + Battery Charging
  • Electronic Overload Protection
  • Mains Transient Protection

Specifications:

Output (mains on)

13.8V dc nominal

Load Output 08 Maximum 1.0A  - 12 hours @ 580/660mA  (7/8Ah)
Mains Supply 90V  - 265V a.c @50/60Hz
Environment

-10C to 40C @ 95%RH

Enclosure
Type A 200H x 230W x 80D - hinge lid
   
Box Sizes for battery
'08' models 1 x 7 or 8Ah 1.0A**
   
*Communication devices will fit into a 'B' size box when used with a 7/8Ah battery.
**Full current to load plus additional current to charge standby battery

GEN range Complies with the following standards::

EN50131-6:2008      GEN2 –Grade 2        GEN3 – Grade 3           All Environmental Class II

Optional Order Related to this Item Available on Request:

PART NO DESCRIPTON
GEN3-08-F 12V d.c. Switch Mode PSU (13.8V) 1A to load + additional current for battery charging. Grade 3 Intruder systems. Mains, Battery and PSU volt free fault outputs. Deep discharge protection. Diagnostic LEDs. Lid & rear tamper. Low quiescent battery standby c

There are no reviews for this product.

Write a review

Please login or register to review