BBV Rx10X/AL Multi Protocol Dome Interface incl. 4 Alarm Inputs

BBV Rx10X/AL Multi Protocol Dome Interface incl. 4 Alarm Inputs

The Rx10X/AL is designed to offer a simple solution for applications where there is a need to control a variety of 3rd Party Dome Cameras including 4 alarm inputs. The receiver offers considerable opportunities for upgrading existing BBV telemetry systems as it is now possible to add a wide range of integrated domes into the system.

Compatable dome protocols include: Pelco P/D - VCL485 - Dennard - Panasonic - Vicon - Philips - Honeywell Acuix - Videcon - Sensormatic - JVC - Vista - Merit Li-Lin - Genie ASD276 & ASD376

Controlled from either BBV Up-the-Coax over 250M of RG59, 500M of CT125 or BBV 20mA current loop, each will control a single dome from a switch-selectable range of protocols. This allows a service/installation company to carry stock knowing that a simple switch selection is all that's required to choose a specific dome to control.

Features:

• Compatible with both fixed speed and proportionally controlled variable speed domes.
• No additional cabling required. Designed to operate over 500m using standard CT125 coaxial cable.
• Video launch amplifier provides loss compensation for optimum picture quality.
• Will operate on 20mA current loop as standard for situations where coax control is impractical.
• Low voltage supply.
• Auxiliary relay 5A 230Vac (Rx10X/230/24/WBX)
• Can be supplied from domes PSU (see manual for exclusions)
• Compatible with all BBV telemetry transmitters and equipment using BBV up-the-coax telemetry.
• Small & compact design.
• Simple to install.
• No specialised knowledge required.

The RX10X range is capable of driving the following domes:

JVC TK-C655B, 675B & 676; Panasonic (WV-CSR400/600/650); Dennard (2040,2050, 2055,2060); Genie ASD276 & ASD376; Panasonic (WV-CS850/860/960); Phillips/Bosch; Pelco P Protocol, Pelco D Protocol; Vista Powerdome; Vicon Surveyor; VCL-TP; Sensormatic

For more details, please refer with our attached datasheet.