(Megapulse) MegaPulse Battery Rejuvenator

(Megapulse) MegaPulse Battery Rejuvenator

Gain maximum performance and service life from your lead acid batteries with MegaPulse – a battery maintenance system that helps prevent sulphation build-up and removes existing sulphate crystals to restore capacity. MegaPulse will help keep your battery in peak condition and prolong life.

Key Features:

MultiVoltage
MegaPulse can be used will all DC systems from 6V to 48V. Battery types include Absorbed Glass Mat (AGM), Calcuim, Flooded, Gel Cell, Hybryd, Sealed (SLA), Spiral Cell and Valve Regulated (VRLA).

Simple Installation
MegaPulse promotes good ‘house keeping’ of your batteries. When a battery is not in use, MegaPulse should be connected at all times to help keep the battery healthy. Connect the cables onto the positive and negative battery terminals of a single battery or a battery bank.

Fully Automatic 
No selections are necessary. MegaPulse automatically adjusts to the correct voltage system from 6V to 48V. Once connected, it will begin a commissioning sequence followed by the de-sulphation of the battery.

Tested Technology 
MegaPulse uses a patented process that suppresses sulphation build-up on the battery plates, a common cause of lead acid battery failure. The manufacturers have had this product evaluated and approved by noted energy providers and car manufacturers.

Saving Money & The Environment 
With ensuring peak battery performance, this means you save money on battery costs by maximising battery life. You’ll help protect the environment by not discarding batteries prematurely to landfill or for recycling.

Specifications:

• Battery Types: For all DC systems including Absorbed Glass Mat (AGM), Calcium, Flooded, Gel Cell, Hybryd, Sealed (SLA), Spiral Cell and Valve Regulated (VRLA)
• Battery Voltages: 6V / 12V / 24V / 36V and 48V
• Charger Compatibility: Compatible with all charging systems
• Polarity Protection: Protected against accidental reverse polarity connection
• Installation: Directly on the battery or battery bank - multiple units can be installed in series configuration on large battery banks to achieve voltages above 48V
• Unit Protection: Water, dust and vibration proof to IP67
• Start Up Delay: 3 second start up delay to eliminate sparking upon connection
• Deactivation Temperature: Automatically deactivates when internal electronics temperature rises above 70c
• Load Test: Performs industry standard battery load test (12V and 24V applications only) Load Test Results displayed as GREEN LED = BATTERY/OK and RED LED = CHECK BATTERY, Load Test performed after installation and repeats the test every 2hr (12V and 24V applications only) providing the battery is not under charge.

3 Mode Activation:

• Mode 1 (constant) suitable for all applications
• Mode 2 (window) suitable for when radio interference is experienced on AM band, switching to mode 2 deactivates the unit while driving and reactivates the unit whn the engine is off
• Mode 3 (high activation) suitable for electric vehicles if interference is experienced during operation