DA774/DB/24, 24V DC 4A Deep mild steel wall mount Power Centre
- Brand:Dantech
- Product Code:DA774/DB/24
- Availability:Please Call or Email Us to Check Availability
Your shopping cart is empty!
DA774/DB/24, 24V DC 4A PSU ASSY IN LARGE ENCL. FITS 2 x 38AH BATTS
24V DC 4A Deep mild steel wall mount Power Centre
A 24V 4A DC power supply unit. This unit is equipped with low-voltage monitoring clean contacts, mains-failure clean contacts and battery low-voltage disconnect (deep-discharge protection).
There are 10 load outputs available for use. All load outputs use automatic self-resetting fuses rated for continuous use and will allow a momentary inrush. Two of the outputs are designed to carry a higher load than the other eight. Please refer to product data sheet for more information.
Removable PSU sub-plate allows replacement without removing the wall-mounted enclosure.
These units can also be supplied with a removable sub-plate drilled to a required hole pattern to fit your access control PCB (or other equipment), size permitting.
All load outputs can be selected as either: (1) Fire alarm switched or (2) Continuously powered. Simply move the associated jumper link to either position 1 or 2 for each load output. Ideal for access control applications where door locks are required to de-power during a fire event regardless of mains power availability.
Each output is individually fused with self-resetting fuses rated for continuous use to protect the power supply in the event of equipment or wiring failures.
Electromotive forces are caused by changing magnetic fields around inductors, often through self induction during inrush, inducing a voltage back into the circuit. Should devices such as magnetic locks and motors cause an EMF spike, these units are equipped with back EMF spike protection to prevent damage.
In the event that mains power is not detected the Mains Fail
monitoring contacts will change-over. The volt free change-over contacts are ideal for switching equipment or providing signals to external systems.
If the unit is equipped with a VRLA battery, the DA774 unit will automatically trickle charge it when mains power is available and seamlessly switch to this as a power source when mains power is not available. In the event of the battery is running low on capacity the Low Vol
monitoring contacts will change-over, ideal for signalling systems or switching other equipment that the system is about to de-power.
Completely discharging a battery or deep cycles can cause significant damage to batteries and reduce their future performance. To prevent this type of damage all DA774 Power centres will automatically disconnect a connected battery that has been depleted of useful capacity to protect it from damage. When mains power is restored, the unit will automatically re-connect and re-charge it.
The internal power supply unit has a green LED to give visual indication of if power is available.
Each output of the Power Centre has a green LED indicator to visually show an engineer the current power status of each output.
Precision-made enclosures, finished in a durable easy to clean white powder coating.
To assist with quick and simple installation, each enclosure features cable knock-outs
on all sides so engineers can quickly prepare the enclosure for cable glands for wiring such as the mains power cable on any side of the enclosure.
Each enclosure is powder-coated in white to provide a tough durable, easy to clean finish.
Each unit is fitted with a key locking, tamper-switched door that can be unhinged and removed without tools when unlocked for easy engineer access inside the unit. The tamper switch can be connected to internally fitted equipment such as access controllers or other equipment to signal that the enclosure has been opened.
Dantech Electronic Engineering design the products we make. We manufacture and test our products by hand with trained technicians to ensure every single unit that leaves our factory is something we are proud to have our name on and our guarantee. We are so confident in the quality of our made in Britain products, they each have five-years warranty. We take pride in knowing our customers receive a product that will do the job it was designed to do, for true value.
Switched-mode power supplies are much more energy efficient than coiled transformers that continuously produce magnetic fields for another coil to convert to an alternative power level. Switched-mode power supplies have power storage that feeds output filtering circuits at much lower voltages to that of the mains-input which is switched on and off at high frequency to maintain the power in the supply. This method wastes less energy making a much more energy efficient power supply.
Integrated UPS function supports VRLA batteries up to 17Ah. When mains power is available this unit will charge and maintain the battery. When mains power is not available, this unit will seamlessly switch to the battery for power input maintaining power to the outputs. When power is restored, the unit will automatically seamlessly switch back to mains power and re-charge the battery.
27.4V Battery terminals are suitable for VRLA battery configurations of 24V up to a capacity of 17Ah.
Specifications:
Voltage | 24V DC (27.4V) |
Current | 4A Maximum total load |
Outputs | 8 x 500mA & 2 x 1.5A |
Connection type | PCB terminal block (2.5mm²) |
Fused | Self-resetting fuses |
Output ststus indication | Green LED indication |
Fire enable control1 | +24V DC Feed (+F) to Return terminals (+R) with 0V common for additional units |
Fire enabled outputs configuration | Individual PCB Jumper per output to set powered or non-powered during fire condition |
1Fire control loop (+R) return can be set with a feed of 12V or 24V DC. e.g. DA774-LGE-12V fire control return (+R) can be included with DA774-LGE-24V fire control (+F) feed.
VRLA Battery protection | 20x5mm 10A Quick blow glass fuse and automatic deep discharge protection |
Connection type | PCB terminal block (2.5mm²) |
In-built back-EMF Spike protection | Yes |
VRLA Battery included | No |
VRLA Battery support | DA774-xxx-24VDC: 1x 27.4V DC for 24V or 2x 12V VRLA batteries |
Contact configuration | Single pole change over (Approximately 30 < 60 second delay) |
Voltage | Maximum 30V DC |
Current | Maximum 1A |
Connection type | PCB terminal block (2.5mm²) |
Contact configuration | Single pole change over (Battery at 21.0V change over) |
Voltage | Maximum 30V DC |
Current | Maximum 1A |
Connection type | PCB terminal block (2.5mm²) |
Voltage | 110V - 240V AC @ 50Hz |
Power consumption | < 250VA (Approximate under full load) |
Connection type | 10mm² internal terminal block (3 x 1.5mm² or 2 x 2.5mm²) |
Fused | 3A Mains fuse (BS1362) |
Mains on indication | Green LED indication |
Fire enable trigger | +5V < +30V DC |
Operating temperature | -10°C to +40°C |
Storage temperature | -20°C to +50°C |
Operating relative humidity | Maximum 95% non-condensing |
Enclosure material | CR4 Mild steel |
Finish | Powder coated RAL9016 White |
Model | Width2 | Height2 | Depth2 | Weight3 |
---|---|---|---|---|
DA774-LGE-12VDC | 495 | 690 | 120 | < 11.7Kg |
DA774-LGE-24VDC | 495 | 690 | 120 | < 11.7Kg |
DA774-DB-12VDC | 600 | 300 | 200 | < 10.0Kg |
DA774-DB-24VDC | 600 | 300 | 200 | < 10.0Kg |
DA774-SM-12VDC | 495 | 420 | 120 | < 8.6Kg |
DA774-SM-24VDC | 495 | 420 | 120 | < 8.6Kg |
DA774-XSM-12VDC | 405 | 400 | 120 | < 7.5Kg |
DA774-XSM-24VDC | 405 | 400 | 120 | < 7.5Kg |
DA774-P-12VDC | 280 | 155 | 90 | < 1.4Kg |
DA774-P-24VDC | 280 | 155 | 90 | < 1.4Kg |
2Product dimensions are in mm and do not include packaging.
3Product only weight. This does not include packaging.
Estimated operations before failure (MTBF) | 50,000 hours |
CE Approved | Yes |
For more details on this product range, including part numbers, please click on the links below to download the relevant document for this product.
This website uses cookies. For more information click here.