Scope, DL3-10-24V, 10-Zone Programmable DigiLink 3 Transmitter - 24V
- Brand:Scope Communications
- Product Code:DL3-10-24V
- Availability:Please Call or Email Us to Check Availability
Your shopping cart is empty!
Scope, DL3-10-24V, 10-Zone Programmable DigiLink 3 Transmitter - 24V
System Overview:
The Scope Digilink MK2 DL1024V and DL512V are 24V dc* powered, programmable Short Range Device (SRD) radio systems which can be used to transmit data to fixed base stations and/or portable receivers.
The unit is supplied with either 5 or 10 inputs, which can be hardware configured to accept either dry contact (no voltage) or voltage (5-18V dc) triggers. Each input is pre-programmed as either N/O (Normally Open), N/C (Normally Closed) or C/S (Change of State). Triggering any of the inputs (zones) will result in pre-programmed data (including up to 80 characters of text message) being transmitted to the selected receiver or group of receivers.
The unit can be programmed to repeat transmit (1-5 repeat transmissions or until reset) if required. In addition, the trigger filter time can be defined between 100 milliseconds and 25 seconds (period for which the zone must remain in the active state before triggering). One input (IN9) can be configured as a Reset to clear any current transmission cycles. This can also be used as an “Arm/Disarm” facility for the alarm inputs. Various other parameters can be programmed to suit specific user requirements.
System Specification:
Transmitter:
General:
For more details, please refer with our attached manual.
This website uses cookies. For more information click here.