VPS-215-E, 0.5A Output Power Supply, 24Vdc, 7Ah Batteries Max
- Brand:Eurofyre
- Product Code:VPS-215-E
- Availability:Please Call or Email Us to Check Availability
Your shopping cart is empty!
28-002, ProFyre P5 5A Power Supply, 24Vdc, 17Ah Batteries Max
Xtralis Power Supply Units are technically matched to provide sufficient current and battery charging capacity for Xtralis aspirating smoke detectors (ASD), meeting the requirements of EN54-4. Xtralis Power Supply Units also perfectly match Xtralis’ range of aspirating smoke detection in style and appearance.
Style E variants of the Xtralis PSU are VdS approved and CE marked to EN54-4 and are, therefore, particularly useful in applications where these approvals are required. They may also be suitable for use in areas where ISO 7240-4 is required.
This unit is intended as a low-cost unit to supply a single pipe ASD which only requires 7Ah batteries and is the budget unit in the range. It is a simple construction with no LEDs on the cover in order to keep the cost to a minimum. Despite this, the unit still compliments its corresponding ASD detector with cable entry knockouts lining up with the cable entries on a variety of Xtralis detectors, including the VESDA-VLC and the ICAM IAS and ICAM ILS products. The internal charger is EN54-4 approved and internal LEDs indicate OK (output healthy) and fault.
Key Features:
Specification:
Nominal AC Supply Voltage | 230 Vac (tested +10%—15%) |
Power Output | 19.5-30 Vdc |
Load | 0.5 / 1.0 amps (1 amp not EN54-4) |
Dimensions | 226 x 286 x 113mm |
Temperature | -5º to 40ºC ambient |
Humidity | 95% RH non-condensing |
IP Rating | IP30 |
Batteries (not supplied by Eurofyre) | 2 x 12 V, 7Ah |
Batteries (not supplied by Xtralis) | Yuasa NP (or equivalent) |
Indications | Output OK: green LED Fault: yellow LED External only |
Fault Relay | Change-over NO-COM-NC 1A @ 50 Vdc |
Fuse Rating | Battery: 3.15A fast AC supply – 1A HRC (both 20 mm) |
Cable Entries | 9 off 20/25mm knockouts Various positions |
Colour / Finish | Light grey RAL 9018 texture Powdercoat |
Mounting | 4 x 5mm holes on 220 x 180mm centres |
Contact us on sales@hunters-wholesalers.co.uk for more specific product information and pricing installation and training
.
This website uses cookies. For more information click here.