CTI Plus, Coax Telemetry Interface Single Camera

CTI Plus, Coax Telemetry Interface Single Camera

The CTI PLUS is an innovative product designed to provide conversion from RS422/485 data to PELCO, VCL or BAXALL / VISTA up the coax.

Up the Coax telemetry allows for upgrading of static cameras to PTZ without the need for additional cabling. The CTI PLUS can also be used remotely from a matrix to allow up-the-coax control from a hub point and video brought back via fibre, IP etc.

CTI PLUS - The CTI PLUS is cost effective for smaller sites, where only a few cameras require coax telemetry, or where sites are migrating to single / four channel IP encoders. The CTI PLUS converts a wide range of RS422/485 serial protocols into Pelco, VCL or Baxall / Vista up the coax telemetries. The small size of the unit means it can easily fit into other enclosures already present on site. The CTI PLUS has a range of 1 - 255 addresses (depending on Protocols) and is supplied with a 12V 500mA power supply.

Key Features:

• Ability to configure via an OLED display.
• Compact design allows flexibility with the location of the CTI Plus,  easily fitting into other enclosures already present on site.
• Communications can be debugged and viewed via the live on screen  display.
• Visible OLED display also shows Telemetry, Menu, Video Sync level,
• Termination to allow daisy chaining, and Baud rate is selectable from 2400,4800, 9600, 19200.(Protocol Dependent)
• Supports addresses 1 – 255 (Protocol Dependent)
• Supplied with a 12V 1000mA PSU.

For more details, please refer with our attached datasheet.