HAES, HFW-CEM-02, Wireless to Conventional Interface Module

HAES, HFW-CEM-02, Wireless to Conventional Interface Module (Requires Power supply)

The HyFire Wireless to Conventional Interface allows you to connect wireless fire detection devices to your fire alarm system alongside traditional hard-wired devices.

Designed to compliment existing conventional or addressable fire alarm systems, this unit provides a solution to expand your network with up to 32 radio field devices including detectors, sounders, beacons and manual call points.

Tough IP68 housing makes this unit suitable for both wet indoor environments and exterior use. An in-built LCD display and 5 LEDs give quick indication of the unit's status while two orthogonal antennae help reduce radio fade and ensure reliable radio communication.

Key Features:

• Bi-directional wireless communication
• Self-optimising wireless amplitude and frequency
• Automatic wireless channel-hopping
• Fully intelligent
• High reliability and sensitivity
• Flexible onsite device adjustment
• IP68 protection for exterior mounting
• Makes additions to existing wired systems easy and cost-effective
• Requires PSU

Specification:

• Communication With Field Devices: 150m (open space)
• Communication With Expander Module: 300m (open space)
• Operating Frequency: 868-870 MHz
• Modulation Type: Frequency modulation
• No. Of Operating Channels: 7
• Time Period Between Wireless Signal Transmissions: From 7 seconds to 2 minutes
• Dimensions (mm): 116 x 107 x 65
• Operating Temperature Range: -30°C to +50°C
• Radiated Power: 0.01 - 10mW
• Current Consumption: 17mA
• Operating Voltage: 10-27 V DC
• IP Rating: IP68